Export
2022
- China
- Japan
- Philippines
- India
Pln
PLTU Pangkalan Susu
PLTU Teluk Sirih
PLTU Labuan
PLTU Surajaya
PLTU Lontar
PLTU Indramayu
PLTU Adipala
PLTU Rembang
PT Semen Indonesia
PLTU Tanjung Awar-awar
PLTU Pacitan
PLTU Paiton
PLTU Asamasam
PLTU Takalar
PT Antam
PT SMI
Data Anchorage (Transhipment)
PT ARUTMIN INDONESIA PORT GUARANTEED LOADING RATES
1. North Pulau Laut Coal Terminal (NPLCT)
| Cargo Lifted (metric tons) |
Guaranteed Loading Rates (metric tons/weather working day) |
|---|---|
| 0 - 20,000 | 10,000 |
| 20,001 - 45,000 | 20,000 |
| 45,001 - 75,000 | 25,000 |
| Above 75,000 | 30,000 |
2. Loading Anchorage
2.1 Floating Crane (FC)
| Cargo Lifted (metric tons) |
Guaranteed Loading Rates (metric tons/weather working day) |
|---|---|
| 0 - 35,000 | 8,000 |
| 35,000 - 150,000 | 10,000 |
2.2 Geared Vessel (Loading with the Vessel’s Cranes)
| Cargo Lifted (metric tons) |
Guaranteed Loading Rates (metric tons/weather working day) |
|---|---|
| 0 - 75,000 | 10,000 ( 4 x 25 Mt SWL + 4 x 12 CBM grab) |
Notes
All guaranteed loading rates per weather working day including Saturdays, Sundays and public holidays, but excluding the major Indonesian holidays.
The guaranteed loading rates shall relate to the parcel size (actual cargo lifted) and not to the size of the vessel or shipment being loaded.
The standard loading rates shall apply to vessels which comply with the regulations and restrictions.
Vessels exceeding the restrictions or not fulfilling the minimum requirements must agree to a loading rate with Arutmin before the vessel's arrival.
Coal Transport And Loading Facilities
Processing Facilities
- Crusher Asam Asam
- Crusher Kintap
- Crusher Pelabuhan Satui
- Crusher Pelabuhan Batulicin
- Washing Plan Senakin DMP & Jig Plant
Loading Facilities
- Stacker, Reclaimer & Shiploader NPLCT
- Continuous Barge Unloader (CBU) NPLCT
- Tongkang
- Load Out Conveyor Asam Asam
- Overland Conveyor (OLC) Asam Asam
- Load Out Conveyor Kintap
- Overland Conveyor (OLC) Kintap
- Load Out Conveyor Satui
- Load Out Conveyor Batulicin
- Load Out Conveyor Senakin SBL & AT02
Coal-Transport
OverLandConveyor
Realizing the importance of transportation in the coal business chain, Arutmin is equipped with an excellent infrastructure and transportation system.
Some facilities such as the Coal Processing Plant (CPP) and Port Load Out are equipped at every site. Other facilities such as Overland Conveyor (OLC) are provided at several locations.
These supporting facilities are continuously improved in line with the needs and current technology development. The presence of NPLCT Port has become a crucial milestone towards a smooth process of loading and transporting coal to our consumers
Quality Assurance
Arutmin implements the best quality management procedures worldwide for our coal production process.
From mining to shipping, the coal runs through sampling and testing at each stage. Metal and magnet detectors are installed in all crushing and washing facilities in the loading and unloading port of the barge and the transport terminal, Port NPCLT.
A dedicated Logistics and Quality Team constantly monitors the coal production process for 24 hours. This is done to ensure the quality of the coal meets the specifications listed in the contract.
1. Dust Control
Dust control is done by adding 1% moisture to equilibrium dust using the Dust Suppression System (DSS) located at the CPP & Port.
The amount of water for DSS must be maintained, therefore a Sea Water Reverse Osmosis (SWRO) facility is built so the water is constantly available through all seasons.
2. Coal Quality Monitoring Using Real-Time Analyzer
The analysis of the Coal Quality Scanner on CPP is done instantly every 2 minutes, which helps monitor Good Mining Practice activities and loading accuracy.
3. Prevention of Metal Contamination
Our commitment to providing double protection against metal contamination, such as gear buckets, gear crushers, plates, pipes, bolts, wires, etc., is done by using metal detectors and magnetic separators.
4. Non-Metal & Oversized Contamination Prevention
The prevention of non-metal and oversized contamination, particularly oversized coal, is done by installing Screening 150 mm at the end of the OLC process.
This is to ensure a homogeneous size of coal that is shipped. This screening not only prevents non-metal contamination but also metal contamination.
5. Auto-Sampler Sampling & Dedicated Laboratorium Analysis
To monitor the homogeneous coal quality, sampling is done using Auto-Sampler.
With a dedicated laboratory, the sample analysis is obtained quickly and precisely during the loading process to the ship.
